FS-i6X 10CH Radio Transmitter and Receiver FS-iA10B 2.4G RC Controller for Airplane Helicopter FPV Drone RC Quadcopter

4)Omni-directional Gain Antenna — The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection.
5) Low Power Consumption — The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life.
Product Description

FS-i6X 10-Channel RC Transmitter and FS-iA10B Receiver

The FS-I6X and FS-iA10B connect so well that you do not need to make new connections when you receive them.

In normal use, there is no need to connect the “bundle cable”.

If bonding with other FS-iA10B receivers, you can do the following.

1, Connect the included binding cable to the receiver’s B/VCC port.

2, Plug the DC 4V- 6.5V power supply into other ports, the positive and negative poles cannot be wrongly connected.

3, Keep pressing the “BIND KEY”, and then turn on the transmitter to enter the binding mode.

4, The transmitter will display the RX voltage, that means the binding is successful.

5, Remove binding wire, Check the operation of the servos. If something doesn’t work as expected, start this process from the beginning.

>

DTXMX Flysky FS-i6X is a transmitter built for

fixed-wing / glider / helicopter models

. Can also support

RC Quadcopter/Car/Boat

, even if these icons are not in the menu. It features the AFHDS2A and AFHDS protocol, support for up to 10 Channels through DIY upgrades, and is compatible with many ST*** RC Simulators via USB. [RC simulator software purchased separately]