ATOMSTACK S40 Pro 210W Laser Engraving Machine with Automatic Air Assist Kits, 48W Industrial-Grade Laser Cutting Machine with Touchscreen, 24W/48W Dual Modes One Key Switch, Precious Gifts for Him

Diverse Online and Offline Control Methods- The S40 Pro laser cutting machine has three control methods: COMPUTER (connected via USB to the laser engraving machine, controlled by LaserGRBL/LightBurn software), TOUCHSCREEN (insert a TF/SD card with the working trajectory or file, then control through the touchscreen), and SMARTPHONE (after firmware update, download our self-developed app, then connect to laser engraving machine via WiFi and finally control through the app).
Remarkable Automatic Switch Air Assist Kits- On the one hand, S40 Pro laser cutter is equipped with the latest F30 Pro air-assist kits, featuring a built-in dual pumps. On the other hand, with standard F30 Pro high flow air assist, you can turn on Lightburn M7 mode to achieve different modes of cutting/engraving automatic switch air assist. In this way, ATOMSTACK S40 Pro cutting capacity has been greatly enhanced, as well as cutting accuracy and quality can also be largely optimized.
Safety Protection and Other Creative Designs- Firstly, the panoramic light filtering glass protector plays a good role in protecting your eyes, which can filter 97% of the ultraviolet light. Secondly, the drag chain wire harness solution makes wire harness run smoothly without tangling and improves the wire life. Besides, configured with an emergency stop button, if there is an accident, you can stop the machine at any time. Reset switch and limit switch make the engraving process safer.

Specifications

:

Product Model: AtomStack S40 Pro

Engraving size: 400*400mm ( 15.74 * 15.74″ )

Cutting materials: 20mm basswood, 25mm pinewood, 20mm acrylic, 9mm MDF, 0.1 mm metal

Overall machine power: 210W

Laser output optical power: 40-48W

Laser wavelength: 455±5nm

Engraving accuracy: 0.01 mm

Engraving speed: 500mm/s(30000mm/min)

Cutting speed: 2200mm/min

Laser spot: 0.08 mm* 0.1 mm

Focusing mode: fixed focus laser, no focus

Laser protective cover: There is a protective shield on the laser that protects the user’s eyes, no need to wear additional goggles.

Operating methods: Touchscreen, smartphone, computer

Operating software: LaserGRBL, LightBurn, supports Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11 system

Supported file formats: NC, BMP, JPG, PNG, DXF.

Data transfer method: USB connection

Input: 100-240V AC, 50/60HZ

Output: 12V 8.5A