3D Printer Build SurfaceSUNLU 9.25×9.25 inch (235 X 235mm) Removable Magnetic 3D Printer Build Platform Heated BedStronger Magnetic Adhesion2 PCS Print Surface Sheet + 1 PCS Magnetic Base Sheet

Please double-check before attaching the base plate sheetTape half of the surface sheet and the magnetic sheet together. If both sheets can be lifted up at the same time, it is correct. If the two sheets cannot be lifted at the same time, rotate one of them by 90°.
How to installTear off the sticker on the back of the magnetic sheet Adhere the magnetic sheet to the printer base Adjust the surface sheet to absorb on the printer base plate Start 3d printing
Easy to useSUNLU magnetic 3D printer bed platforms can be installed on hot beds and glass platforms. Printing is not warping. No glue is required. The model is easy to stick and easy to take without deformation.
Stronger magnetic adhesionMore flexible and resistant to bending. Great first-layer adhesion, make sure the model can be firmly attached to the surface of the print platform. SUNLU magnetic 3D printer bed platforms had solid adhesion and the print went well.
Super easy print removalThe plate is flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you’re done printing.
Fast heatingThe magnetic platform with excellent thermal conductivity heats up faster. Quick heating into the printing process.
Caution The thickness of SUNLU magnetic 3D printer platform is 2mm (± 0.1 mm), it must be re-leveled after attaching this item to avoid damaging the surface. When leveling the platform, please leave a little gap of 0.1 – 0.2 mm.
High CompatibilityCompatible with Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Pro X/Ender 5 Pro 3D Printer/SUNLU T3 Printer. Compatible with PLA/PETG/PETG/ABS/PLA META/SILK and any other 3d printer filaments.